Welcome to www.measuring-tools.biz
Here you will find information about wide measuring tools and measuring instruments
Last Articles
How to Use a dial indicator
A dial indicator doesn't assess the direct size of a work piece but is used for comparative measurements.
Dial indicator reversal span error (hysteresis error)
Different spindle moving direction in dial indicator while zero setting and
measuring causes reversal span error ( hysteresis error)
Howto use a caliper
A vernier caliper is easy to use – some important hints for your practice. Read about the differnt functions
Howto use dial bore gauge
Internal bore gauges are devices for Difference measurement,
primarily for the internal dimension of bore diameters. Internal bore
gauges can be setup in a way that a wide measuring range can be
covered by replacing the fixed measuring anvil.
Howto read a vernier caliper
A vernier caliper is easy to use – but to read the vernier may need some advice.
Parts and functions of a vernier caliper
How to Use a Dial Indicator to Determine the Lateral Deviation of Disc Brakes Rotors
The incorrect setup of disc brakes, caused by excessive wear and tear, mechanical overloads and contamination with dirt and rust, can cause the appearance of a warping of the rotor of the disc brakes, also known as an excessive lateral deviation. When this happens the driver will often feel an unusual vibration in the vehicle when the brake pedal is operated, especially at smaller speeds. Also, drivers can experience other problems such imprecise movement of the wheels and increased braking distance.
Parts and functions of a Micrometer
Parts, construction and working Principle of the micrometer screw Gauge explained
Parallax Error reading a Micrometer Screw Gauge and howto avoid it
Using a Center Square
How to Use a Center Square in Finding Center and Diameter of a Circular Object